Filter
Top Products
- Clean the pre-lter when the rst lter replacement light ashes to
ensure optimal functioning of the appliance.
1 Place your ngers in the recesses of the side panels and gently pull
the top part of the front panel towards you. Then lift the hooks at
the bottom of the panel out of the bottom of the appliance.
2 To remove the pre-lter, grab the two projections and pull the lter
towards you.
3 Wash the pre-lter under a running tap. If the pre-lter is very dirty,
use a soft brush to brush away the dust.
Tip: Alternatively, you can clean the pre-lter by removing the dust with a
vacuum cleaner.
4 Air-dry the pre-lter.
Note: Make sure that the pre-lter is completely dry. If it is still wet, bacteria
may multiply in it and shorten the lifetime of the pre-lter.
5 Put the pre-lter back into the appliance. Attach all hooks properly
to the appliance.
Note: Make sure that the side with the two projections is pointing towards you.
6 To reattach the front panel, insert the bottom hooks into the bottom
of the appliance rst (1). Then push the panel against the body of the
appliance (2).
1
2
English 15