Filter
Top Products
Philips ProBridge 2 0150-0241B
© 2004 GE Security
All Rights Reserved.
Any GE Security software supplied with
GE Security products is proprietary and
furnished under license and can be used or
copied only in accordance with the terms of
such license.
This document contains proprietary
information that is protected by copyright. No
part of this document may be reproduced or
transmitted in any form or by any means
without the prior written permission of
GE Security.
The information contained in this document is
subject to change without notice. GE Security
in keeping pace with technological advances,
is a company of product innovation. Therefore,
it is difficult to ensure that all information
provided is entirely accurate and up-to-date.
GE Security accepts no responsibility for
inaccuracies or omissions and specifically
disclaims any liabilities, losses, or risks,
personal or otherwise, incurred as a
consequence, directly or indirectly, of the use or application of any of the contents of this
document.
For the latest product specifications, visit GE Security online at www. GE-Security.com or
contact your sales representative.
For technical support before and after installation, call 800-469-1676.
Technical support is available 24 hours a day, 7 days a week.
Call: Tech Support 800-469-1676 (6 A.M. – 5 P.M. PST Monday through Friday)
Tech Support 541-740-3589 (all other times)
Main 800-343-3358 or 541-754-9133
Fax: Tech Support 541-752-9096 (available 24 hours a day)
Main 541-754-7162
Web: www.GE-Security.com
0150-0241B / May 2004
This equipment has been tested and
found to comply with the limits for a
Class A digital device, pursuant to
part 15 of the FCC Rules. These
limits are designed to provide
reasonable protection against
harmful interference when the
equipment is operated in a
commercial environment. This
equipment generates, uses, and can
radiate radio frequency energy and,
if not installed and used in
accordance with the instruction
manual, may cause harmful
interference to radio
communications.
You are cautioned that any changes
or modifications not expressly
approved by the party responsible
for compliance could void the user's
authority to operate the equipment.