Filter
Top Products
Philips ProBridge 15 0150-0241B
RS485 Network Address Camera Address AutoDome Address
025 1 – 32 0769 – 0800
026 1 – 32 0801 – 0832
027 1 – 32 0833 – 0864
028 1 – 32 0865 – 0896
029 1 – 32 0897 – 0928
030 1 – 32 0929 – 0960
031 1 – 32 0961 – 0992
032 1 – 32 0993 – 1024
-- -- --
255 1 – 32 8129 – 8160
Philips AutoDome Addresses are calculated as follows:
Philips AutoDome Address = Camera Address + 32 X (Network Address – 1)
Philips Data Converter Unit Switch Setting
Set the switches on the LTC8780 as follows:
S101: Switches 1, 3, and 4 set to OFF. Switch 2 set to ON.
S102: Switches 1 –3 set on ON, switch 4 set to OFF.
See Philips LTC8780 manual for details.
6.3 Using Kalatel Keypads
Keyboards (CBR-KB3/J and KTD-405) are typically used to provide initial
configuration of the Philips AutoDome for setting addresses and presets.
In some specific cases keyboards may be used in conjunction with
the CBR-PB2-PHILIPS units where multiple Kalatel units are being
controlled via one or more local Keyboard. Available keyboards
are only involved when an RS-485 is configured with CBR-KB2/J,
CBR-KB3/J and KTD-405 Keyboards. Please contact Technical
Support for additional instructions concerning these special
installations.
NOTE
NOTE