![](http://pdfasset.owneriq.net/d/d2/dd2ff4a9-fc5f-4228-9a66-c0bed5cfbcbe/dd2ff4a9-fc5f-4228-9a66-c0bed5cfbcbe-bg4e.png)
Adjustment
11 - 38
11. 05.16 Positioner
Requirement
When interrupting the sewing process, the machine must position itself at approx.
4 mm after the BDC of the needle bar.
After trimming the thread, the machine must position itself at the TDC of the
take-up lever.
● Carry out the adjustment as stipulated in the instruction manual of the motor.