![](http://pdfasset.owneriq.net/d/d2/dd2ff4a9-fc5f-4228-9a66-c0bed5cfbcbe/dd2ff4a9-fc5f-4228-9a66-c0bed5cfbcbe-bg2d.png)
Adjustment
11 - 5
11.04.04 Pre-adjusting the needle height
Requirement
With the needle bar at BDC, the distance between the needle bar and the needle plate
must be 15 mm.
● Move needle bar 1 (screw 2) in accordance with the requirement without moving it
laterally.
Fig. 11 - 04
1
2
15 mm