Filter
Top Products
L. Insert backer rod and apply sealant. Install siding, and insert backer rod between the each
jamb cover and the exterior nish material as deep as it will go. Apply a bead of high quality
exterior sealant on top of the backer rod and a corner bead to the top of the head frame
expander. Shape, tool, clean excess sealant. When nished, the sealant should be the shape of
an hourglass.
Note: Backer rod adds shape and depth for the sealant line. is method creates a more
exible sealant line capable of expanding and contracting.
7
INSTALLING INTERIOR JAMB COVE MOULD
A. Install the interior
cove mould. Remove
cove mould from
accessory package
and dry t over the
installation screws.
Install interior cove
mould and secure
with 1" brads into the
jamb and trim.
7A
Cove Mould
NEW CONSTNEW CONST
ALLALLALLALLALLALL