Filter
Top Products
ADDITIONAL CUTTING PATTERNS
$JSDMF)FBE
'VMM$JSDMF
5SBQF[PJE
0DUBHPO
"SDI)FBE
3FDUBOHMF
2VBSUFS$JSDMF
)BMG$JSDMF
0WBM
%PH)PVTF
3JHIU5SJBOHMF
Because all construction must anticipate some water infiltration, it is important that the wall system be
designed and constructed to properly manage moisture. Pella Corporation is not responsible for claims
or damages caused by anticipated and unanticipated water infiltration; deficiencies in building design,
construction and maintenance; failure to install Pella
®
products in accordance with Pella installation
instructions; or the use of Pella products in wall systems which do not allow for proper management
of moisture within the wall systems. The determination of the suitability of all building components,
including the use of Pella products, as well as the design and installation of flashing and sealing systems
are the responsibility of the Buyer or User, the architect, contractor, installer, or other construction
professional and are not the responsibility of Pella.
Pella products should not be used in barrier wall systems which do not allow for proper management of
moisture within the wall systems, such as barrier Exterior Insulation and Finish Systems (EIFS)
ALSOKNOWNASSYNTHETICSTUCCOOROTHERNONWATERMANAGEDSYSTEMS%XCEPTINTHESTATESOF
#ALIFORNIA.EW-EXICO!RIZONA.EVADA5TAHAND#OLORADOPella makes no warranty of any kind
and assumes no responsibility for Pella windows and doors installed in barrier wall systems. In
the states listed above, the installation of Pella products in barrier wall or similar systems must be
in accordance with Pella installation instructions.
Product modifications that are not approved by Pella Corporation will void the Limited Warranty.
IMPORTANT NOTICE