Filter
Top Products
3C
A. Apply a 3/8" continuous bead of sealant to the interior
face of the existing blind stops at the head and both jambs.
B. Place a bead of sealant where the existing stool meets the
existing frame sill and jambs.
C. Place a bead of sealant where the jamb and sill meet.
D. Insert the window into the opening. Set the bottom of the
window in first and tilt the top into place. Make sure the
window is centered in the opening and is pressed firmly
against the exterior blind stops.
E. Place a shim at each of the top corners in line with the pre-
punched holes, and partially insert 2-1/2" screws (provided).
This will hold the window in place while shimming it plumb
and square. Trim shims back so they recessed back 1/4” -
1/2” from the interior face of the window frame.
3
SEALING AND FASTENING THE WINDOW
3A
Jamb
blind
stop
Head blind
stop
Sill
Stool
3B
3E