Filter
Top Products
Part Number: 808F0105© 2011 Pella Corporation
REMEMBER TO USE APPROPRIATE PERSONAL PROTECTIVE EQUIPMENT.
INSTALLATION INSTRUCTION -
INSTRUCCIONES DE INSTALACION
PELLA
®
PRECISION FIT AND RENOVATION POCKET
REPLACEMENT DOUBLE-HUNG VENT WINDOW
Always read the Pella® Limited Warranty before purchasing or installing Pella
products. By installing this product, you are acknowledging that this Limited Warranty
is part of the terms of the sale. Failure to comply with all Pella installation and maintenance
instructions may void your Pella product warranty. See Limited Warranty for complete details at
http://warranty.pella.com.
INTERIOR
Flashing tape
Checkrail
YOU WILL NEED TO SUPPLY: TOOLS REQUIRED:
• Cedar or Impervious shims/spacers (12 to 20)
• Closed cell foam backer rod/sealant backer (12 to 30
ft.)
• Pella
®
SmartFlash
™
foil backed butyl window
and door flashing tape or equivalent
• High quality exterior grade polyurethane or silicone
sealant (1 tube per window)
• Great Stuff ™ Window and Door Insulating Foam
Sealant by the Dow Chemical Company or equivalent
low pressure polyurethane window and door foam -
DO NOT use high pressure or latex foams.
• Tape measure
• Level
• Hammer
• Utility knife
• Pry bar
• Sealant gun
• Screwdrivers
(#2 Phillips and Flat blade)
• Putty knife
• Wood chisel
• Drill
Installation will require two or more persons for safety reasons.
SEALANTSEALANT
Important! The Pella Replacement Window is designed to replace older style double-hung
windows. The original window frame will remain in place and only the existing sash will be
removed. Read these instructions thoroughly before beginning. Failure to install as recommended
will void any warranty, express or implied. For types of installation other than shown, contact your
local Pella representative or visit http://www.pella.com.