Filter
Top Products
Pelco Manual C314M-D (8/98) 13
7.0 SPECIFICATIONS
MECHANICAL
Pan: Movement in horizontal plane:
PT180-24P 0-355°
PT180-24SL 360°
Speed: 9°/sec ±1° (No load condition)
Tilt: ±90° movement in vertical plane
Speed: 3°/sec ± .5° (No load condition)
Maximum
Load: 20 lb (9.08 kg) at 5 inches (12.7 cm) from tilt table surface to
center of gravity (upright or inverted)
Gearing: Chain and sprocket pan drive; worm-gear tilt drive
Bearings:
Pan Heavy duty ball bearings
Tilt Oilite bronze bushing
Duty Cycle: 50% duty cycle; 30-minute rating
ELECTRICAL
Input Voltage: 24 VAC, 50/60 Hz
Power
Requirements: Running
Pan .38 amp (9.2 vA)
Tilt .9 amp (21.6 vA)
Starting
Pan .46 amp (11.1 vA)
Tilt 1.35 amp (32.4 vA)
Connectors:
Pan/Tilt Amp CPC type (mate supplied), installed onto a pigtail exiting
from the base of the unit (all functions: camera power, lens,
video, pan/tilt)
Lens Hirschmann MAB6100
Motors: Two-phase induction type, instantaneous reversing
Limit Switches:
Pan and Tilt Pan and Tilt – 5 amp
External adjustment
Conductor
Requirements: As listed, plus coax cable:
Pan/Tilt 6 or 7 (Left, right, up, down, motor common, safety ground)
Lens 4
Camera AC 2