Filter
Top Products
14 C2655M-A (10/08)
Figure 9. Attaching Support Rails
6. Repeat step 5 for the second support rail assembly.
7. Tighten the 8-32 x 0.375-inch Phillips truss head screws that were attached to the front- and rear-mount rails in steps 2 and 3.
8. Place the unit onto the mount rails by sliding the chassis brackets onto the rails. The unit should slide in and out of the rack easily.
Figure 10. Mounting the NET5308T-EXP into the Rack
WARNING: When sliding out the NET5308T-EXP, be careful not to let the unit fall out of the rack.
REAR-MOUNT RAIL
FRONT-MOUNT RAIL
(2) SCREWS,
10-32 X 0.5-INCH
PHILLIPS FLAT HEAD
(2) SCREWS,
10-32 X 0.5-INCH
PHILLIPS PAN HEAD
RACK FRONT RACK REAR