Filter
Top Products
4 C1420M-I (6/09)
Description
The EH8106L is a sealed and pressurized camera enclosure designed for use with PT780 Series Legacy
®
pan/tilts. This enclosure has lens preset
capabilities and is designed for cameras with fixed focal length or motorized lenses. Two 40-watt heaters are also standard with the enclosure.
The heaters are thermostatically controlled to turn on at 40°F (4°C) and turn off at 60°F (16°C).
The EH8106L makes use of the Legacy Series system of integral security industry components. Legacy components make the installation of the
pan/tilt and enclosure fast and easy. The RediLINK
®
connector is a feature that attaches the enclosure mechanically and electrically to the
pan/tilt in one easy step.
PARTS LIST
ACCESSORIES
QTY Description
1 EH8106L pressurized enclosure
2 Allen head cap screws, 10-32 x 1-inch
1 Tube of Loctite
®
(thread locker)
1 Allen wrench
1 Desiccant bag
1 EH8106L Installation manual
EH8000RKIT Dry nitrogen recharging kit for the EH8100 Series. The kit includes a pressure regulator and nitrogen.
PSKIT8100 Pressure sensor kit with contact closure that can be wired to trigger an alarm if the enclosure’s internal pressure falls
below 5 psi.
EH8006ORKIT O-ring kit containing an O-ring, Loctite lubricant, and desiccant bag.