Filter
Top Products
6 C2216M (5/05)
CMXM100 CORNER MOUNT ADAPTER
To install the CMXM100 refer to Figure 2 and perform the following steps:
1. Attach the corner mount adapter to the mounting surface with the appropriate hardware (not supplied). The mounting surface should be
able to support four times the combined weight of the corner mount adapter, WXM100 mount, and ExSite system.
2. Attach the WXM100 wall mount to the corner mount adapter with the supplied five 3/8-16 x 1.0-inch thread length, stainless steel hex
head bolts and stainless steel lock washers.
3. Secure the ExSite power module to the WXM100 with the 8 mm Allen wrench and four M10 x 16 mm stainless steel bolts supplied with the
power module. Tighten the bolts to 25 to 27 ft-lb (34 to 37 Nm).
4. Complete the ExSite system installation following the instructions supplied with the equipment.
Figure 2.
CMXM100 Installation