Filter
Top Products
4 C2216M (5/05)
Description
This manual contains the installation instructions for the following ExSite
™
Series mounts:
WXM100 Wall mount designed to mount the ExSite
Series system directly to a load-bearing vertical surface.
CMXM100 Corner adapter for use with the WXM100 to mount an ExSite Series system to the corner of a structure.
PAXM100 Pole adapter for use with the WXM100 to mount a system to a horizontal pole.
PXM100 Pedestal mount designed to mount an ExSite Series system directly to a horizontal surface in either an upright or inverted
position.
*Recommended strength of concrete is 3,600 psi or 25 Mpa.
**Minimum of 1/8-inch wall.
Model Supplied Hardware Mounting Surface Recommended Hardware
WXM100 None
Solid Concrete*
Five 3/8-16 x 1-9/16-inch long stainless steel drop-in anchors and five 3/8-16 x 1.0-inch
thread length, stainless steel hex head bolts with stainless steel lock washers
Steel I Beam**
Five 3/8-16 x 1.0-inch thread length, stainless steel hex head bolts with stainless
steel lock washers and 3/8-16 stainless steel nuts
CMXM100
Five 3/8-16 x 1.0-inch
thread length, stainless
steel hex head bolts with
lock washers to attach
the adapter to the
WXM100 wall mount
Solid Concrete*
Six 1/2-13 x 2-inch stainless steel drop-in anchors and six 1/2-13 x 1.0-inch thread
length, stainless steel hex head bolts with stainless steel lock washers
Steel I Beam**
Six 1/2-13 x 1.0-inch thread length, stainless steel hex head bolts with stainless
steel lock washers and 1/2-13 stainless steel nuts
PAXM100
Four 5/8-inch wide x
40-inch (101.6 cm) long
stainless steel straps to
attach the adapter to a
pole
Five 3/8-16 x 1.0-inch
thread length, stainless
steel hex head bolts with
lock washers to attach
the adapter to the
WXM100 wall mount
Steel pole with a
diameter between
4 and 9 inches
(10.16 to 22.86 cm)
Supplied
PXM100 None
Solid Concrete*
Five 3/8-16 x 1-9/16-inch long stainless steel drop-in anchors and five 3/8-16 x 1.0-inch
thread length, stainless steel hex head bolts with stainless steel lock washers
Steel I Beam**
Five 3/8-16 x 1.0-inch thread length, stainless steel hex head bolts with stainless
steel lock washers and 3/8-16 stainless steel nuts