Filter
Top Products
4 ADDENDUM — (9/02)
2. Define which operators can control each camera group by entering the group number(s) in the Group Access field.
Group Access identifies the camera groups
that can be controlled by each operator.
In this example:
Operators 1 and 2 can control any camera
that has not been assigned to a specific
group (0 in C/C Group field in step 1). These
operators cannot control cameras assigned
to any group; that is, groups 1-32
Operators 3 and 4 can control any camera
that has been assigned to group 2 and any
cameras that have not been assigned to a
specific group (0 in C/C Group field in step
1). These operators cannot control cameras
assigned to any other group; that is, groups
1 and 3-32.
Operators 5 and 6 can control any camera
that has been assigned to groups 1 and 2
and any cameras that have not been as-
signed to a specific group (0 in C/C Group
field in step 1). These operators cannot con-
trol cameras assigned to any other group;
that is, groups 3-32.
Operators 7 and 8 can control any camera
that has been assigned to any group
(groups 1-32) and any cameras that have
not been assigned to a specific group (0 in
C/C Group field in step 1).
To select groups, click the Grp
Acc button. The Group Access
Table appears. Click the box in
front of the group number to
toggle the X on or off. An X in the
box grants access; no X denies
access.