Filter
Top Products
ADDENDUM — (9/02) 3
1.2 CAMERA ACCESS FOR PTZ CONTROL (C/C GROUP)
This feature allows you to create up to 32 groups of cameras and then to assign the groups of cameras to specific operators for PTZ
control.
Here is an example of how this feature might be used in an installation:
Cameras 1, 2, 3, and 10 are PTZ cameras that the supervisor uses to record activity on a VCR. He wants his guards to be able to
watch these cameras but not to move them. By restricting access he can eliminate the possibility of the guards accidentally moving
the cameras.
To program camera control access:
1. Define the groups of cameras by entering a group number from 1-32 in the C/C Group field for each camera. Each camera can
be assigned to only one group.
C/C group number identifies the ac-
cess group that each camera has
been assigned to.
In this example:
Cameras 1, 2, 3, 10 = group 1
Cameras 4-9 = group 2
Cameras 11-13 = no group
Groups 1 and 2 can now be assigned
to the operators you want to control
the cameras (refer to step 2).
Cameras that are not assigned to a
group (0 in C/C Group field) can be
controlled by all operators.
The C/C Group number is entered in
this box.