Filter
Top Products
2 ADDENDUM — (9/02)
2. Define which camera groups can be viewed on each monitor by entering the group number(s) in the Group Access field.
Group Access identifies the camera groups
that can be viewed on each monitor.
In this example:
Monitors 1-3 can view cameras that have
been assigned to group 1 and any cam-
eras that have not been assigned to a spe-
cific group (0 in C/M Group field in step 1).
These monitors cannot view cameras from
any other group; that is, groups 2-32.
Monitors 4-9 can view cameras that have
been assigned to groups 1 and 2 and any
cameras that have not been assigned to a
specific group (0 in C/M Group field in step
1). These monitors cannot view cameras
from any other group; that is, groups 3-32.
Monitors 10-13 can view cameras that
have not been assigned to a specific
group (0 in C/M Group field in step 1).
These monitors cannot view cameras
from any group; that is, 1-32.
Monitors 14-16 have been given access
to all 32 groups. Therefore, they can view
any camera that has been assigned to a
group (1-32) as well as any camera that
has not been assigned to a group (0 in C/
M Group field in step 1).
To select groups, click the Grp Acc but-
ton. The Group Access Table appears.
Click the box in front of the group number
to toggle the X on or off. An X in the box
grants access; no X denies access.