Filter
Top Products
8 C3422M-B (3/08)
Figure 10. Removing the Back Box Mounting Plate
3. Thread the wiring from the mount through the mounting plate, and then attach the mounting plate to the mount.
If outdoors, apply thread compound (supplied) to the threads on the mounting plate.
Figure 11. Attaching the Mounting Plate
4. Attach the wire harness connector to the mating connector located on the top of the back box. Connect the fiber optic
cable. Insert the studs and nuts on top of the back box into the mounting plate, turn the back box counterclockwise,
and then tighten the three nuts.