Filter
Top Products
C3422M-B (3/08) 17
Specifications
GENERAL
Construction
Back Box 316L stainless steel
Dome Drive Aluminum, thermoplastic
Lower Dome Trim Ring 316L stainless steel
Bubble Polycarbonate, 0.09-inch thick
V-Band 316L stainless steel
Pressure Relief Brass
Schrader Valve Brass
Connector Nickel-plated steel
Light Attenuation
Smoked f/1.0 light loss
Clear Zero light loss
Pressurization
Valve Schrader
Pressure 8 psig (not factory pressurized)
Pressure Relief 10 psig
Pan Movement 360° continuous pan rotation
Vertical Tilt +2° to -92°
Manual Pan/Tilt Speeds*
Pan 0.1° to 80°/sec manual operation, 150°/sec turbo
Tilt 0.1° to 40°/sec manual operation
Preset Speeds
Pan 400°/sec
Tilt 200°/sec
Operating Temperature (Assumes no wind chill factor)
Maximum 140°F (60°C) absolute maximum; 122°F (50°C) sustained maximum
Minimum -60°F (-51.1°C) absolute minimum; minimal icing at sustained minimum of -50°F
(-45°C); prevents icing at sustained minimum of -40°F (-40°C); de-ices 0.1 inch
(2.5 mm) within 3 hours after power-up
Weight (approximate)
Back Box 10.2 lb (4.60 kg)
Dome Drive 3.3 lb (1.48 kg)
Lower Dome 3.3 lb (1.48 kg)
ELECTRICAL (Dome Drive Only)
Input Voltage 18-32 VAC; 24 VAC nominal
22-27 VDC; 24 VDC nominal
*For variable-speed operation, an appropriate controller is required. With fixed-speed controllers, pan/tilt speed is
20°/sec. The CM6700/CM6800 controller with the KBD200A keyboard has programmable fixed speeds.