Filter
Top Products
Pelco Manual C1901M (4/99) 3
NOTE:
References to illus-
trations in this manual are
keyed to the illustrations in
the manual that is supplied
with the camera.
MC3800-2
MC3800-2X
MC3800-3
10 11 10 11
1312
3 4 5 6 7 8 9
2
1
LOCATION AND FUNCTION OF PARTS
Refer to Illustration B for the location of the camera parts.
B
Top/Front/Side/Rear Views of MC3800 Series Cameras
Tripod adapter (may be
attached to top or bottom
of camera)
Camera mounting
receptacle (1/4-inch
UNC-20)
Lens mount cap
C/CS lens mount
C/CS adjustment pot
CCD iris switch
Level adjustment pot
Backlight control (BLC)
adjustment pot
V-phase adjustment pot
Lens connector (four-pin)
Video output (BNC
connector). Connect to
the VIDEO IN connector
of a monitor.
MC3800-2/MC3800-2X:
24 VAC power input
terminals
MC3800-3: 230 VAC
power cord
1
2
3
4
5
6
7
8
9
10
11
12
13
INSTALLATION
LENS
The lens must be either a C- or CS-mount type weighing less than 1 kg (2.2 lb). The
protrusion behind the mounting surface must be within the limits shown in Illustration C.
C
Compatible Lenses
1
1)
2)
2
2
1 C-mount lens
1/2-inch (12 mm) or less
CS-mount lens
9/32-inch (7 mm) or less