Pelco C1901M (4/99) Carbon Monoxide Alarm User Manual


 
12 Pelco Manual C1901M (4/99)
REVISION HISTORY
Manual # Date Comments
C1901M 11/96 Original version.
4/99 Added MC3800-2X model. Revised manual to new format.
® Pelco and the Pelco logo are registered trademarks of Pelco. © Copyright 1999, Pelco. All rights reserved.
Power Consumption:
MC3800-2: Approximately 4.5 W
MC3800-2X: Approximately 4.5 W
MC3800-3: Approximately 6.0 W
Operating Temperature: 14° to 122°F (-10° to 50°C)
Humidity: 20 to 80%
Storage Temperature: -40° to 140°F (-40° to 60°C)
Acceptable Lens Weight: Less than 2.2 lb (1 kg)
Construction: Aluminum case
Finish: Neutral beige
Tripod Receptacle: 1/4-inch UNC-20
Dimensions:
MC3800-2/MC3800-2X 5.19 in. L x 2.25 in. H x 2.09 in. W
(131.83 x 57.15 x 53.09 cm)
MC3800-3 7.03 in. L x 2.25 in. H x 2.09 in. W
(178.56 x 57.15 x 53.09 cm)
Weight:
MC3800-2: 10.6 oz (0.30 kg)
MC3800-2X: 10.6 oz (0.30 kg)
MC3800-3: 1 lb 9 oz (0.70 kg)
(Design and specifications are subject to change without notice.)
REGULATORY NOTICES
NOTE: This equipment has been tested and found to comply with the limits of a Class B
digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However there is no guarantee that the interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user
is encouraged to try and correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and the receiver.
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.