Filter
Top Products
Link Connections
Page 29Peavey Electronics Corp
Fig. 15, CAB 16d Link Connection Example
Using the Link feature with the CAB
™
16d is basically the same as the other units, but there are several issues that must be con-
sidered when configuring the digital audio connections. It is not possible to “bus” or “Y” digital signals. An active distribution
method must be used or ideally, redundant digital audio should be sourced independently as shown in this example.
NOTE: Using the Link Connectors
for creating redundancy is limited to
“dual” CAB units. Where addition-
al CABs are used, additional redun-
dant units must also be added.
CAB 16o Primary
CAB 16o Secondary or “Slave”
Audio Output
CAB 16d Primary
Redundant Audio Inputs
CAB 16d Secondary or “Backup”
Redundant Audio Outputs
Network Connection
Network Connection
Fig. 14, CAB 16o Link Connection Example