Paradox Hellas S.A. EVO96 Door User Manual


 
User’s Manual 5
3.0 Partitioned System
Your installer can set your keypad to recognize separate protected areas. A separated system is called a partitioned system,
which can be useful in situations where shared security systems are more practical. For example, a company that has both
an office and a warehouse area, can arm and disarm each area separately while controlling access to each area. Therefore,
one person may have access to only one area, whereas another person may have access to all areas. Access to the areas is
determined by the User Access Code.
3.1 Area Display
The Area Status Display enables you to see the status of the individual areas within a
partitioned system. Your installer can partition the system into separate areas.
To view the status of the areas:
1. Enter your [
ACCESS CODE], and then press the [1] button.
2. Press the button corresponding to the area (i.e. 1, 2,...8), or use the [S] and [T]
buttons and press [
ENTER] when the area you want to view appears on the screen.
3. Press [
CLEAR] or [] to exit.
In Area Status Display mode, the following information will scroll on the LCD screen:
ready: if all zones in the selected area are closed.
not ready: if zones in the selected area are open.
Front Door Open: if there is an open zone within that area.
Trouble(s): (section 8.0 on page 19) if a trouble has occurred.
Alarms in Memory: (section 5.3 on page 9) if an alarm has occurred.
Armed; Force Armed; Instant Armed; Stay Armed: displays the
arming status of the selected area.
On the DGP2-640 keypad, specific icons will light up to indicate the status. Refer to
Table 1, “Icon Display and Functionality,” on page 3 for additional information.
In Area Status Display, the following will illuminate for the area selected:
The area lights (A1, A2, A3, and A4) if the associated area is armed. For example, if
you have selected area 3 and it is currently armed, A3 will illuminate.
The numerical light(s) representing any open zone(s) in a corresponding area or
areas.
•The M
EM action light if any alarms have occurred.
•The T
RBL action light if any troubles are occurring.
•The S
TAY action light if the area is Stay or Instant Armed.
•The F
ORCE action light if the area is Force Armed.
•The B
YP action light if zones are bypassed.
LCD
ICON
LED