Filter
Top Products
User’s Manual 21
9.0 Additional Features
9.1 Programmable Outputs (PGMs)
Your system includes Programmable Outputs (PGMs) that can be programmed by your
installer. A PGM triggers when a predetermined event or series of events occurs in your
system. The PGMs can be programmed to reset smoke alarms, turn on light switches,
open or close garage doors and much more. Ask your installer about this useful feature.
9.2 Keypad Settings
You can modify the keypad settings to suit your needs.
1. Scrolling Speed refers to the amount of time that a message will remain on the screen
before moving to the next message.
2. Backlight refers to the illumination behind the buttons and LCD screen.
3. Contrast refers to how dark or pale characters will appear on the screen.
Figure 6: Modifying LCD screen settings on the DGP2-641BL/RB
Figure 7: Modifying LCD screen settings on the DGP2-640
LCD ICON LED
LCD
ICON
1. Press and hold the [6] key for 3 seconds. Your
keypad will emit a confirmation beep and the
display options (1 to 3) will scroll.
The display option will appear on the left, while
the option’s setting will appear on the right.
Press the key corresponding to the setting you
wish to modify.
• Option 1 – Adjust the scroll speed (0 is
the highest, 7 is the slowest)
• Option 2 – Adjust the backlight (0 is the
lowest, 7 is the highest)
• Option 3 – Adjust the contrast (0 is the
lowest, 7 is the highest)
2. Use the [
S] and [T] keys to increase or
decrease the settings.
3. Press the [] key to save the setting.
4. Press the key corresponding to the next setting
you wish to modify or the [] key to exit.