Filter
Top Products
- 32-
Filter Changing and Cleaning
Locking Tab
Loquet de blocage
Filter Cover
Couvercle du filtre
Tapa del filtro
Primary
Filter
Filtre primaire
Filtro primario
Slot
Fente
Ranura
Cleaning Cam
Came de nettoyge
Leva limpiadora
Locking Tab
Loquet de blocage
Filter Cover
Couvercle du filtre
Tapa del filtro
Primary
Filter
Filtre primaire
Filtro primario
Slot
Fente
Ranura
Cleaning Cam
Came de nettoyge
Leva limpiadora
➢
Check primary filter frequently and
clean when dirty.
➢
To remove primary filter, remove the
dust bin and dust bin lid assembly as
outlined in the DUST BIN CLEANING
section.
➢
While holding primary filter over a
trash container grasp filter, rotate
and lift off.
➢
Clean primary filter by gently tapping
over a trash container.Tap on several
sides to ensure best cleaning.
➢
Rinse with water only as needed, do
not use any detergent or soap.
➢
Allow the filter to dry for 24 hours
before putting it back into the
vacuum cleaner.
➢
When cleaning the filter no longer
restores vacuum suction to full
power you need to replace the filter.
TO REPLACE PRIMARY FILTER
➢
With slot side on filter towards the
filter cover slide cleaning cam inside
opening, rotate filter clockwise until
slots lock onto tabs in cover.
Note: Under normal use and care, your
filter can be expected to last up to 5
years.
➢
Re-assemble dust bin lid to dust bin.
Insert into vacuum cleaner and
secure with dust bin latch.