Filter
Top Products
- 40 -
TO REMOVE BELT
➢
Turn Power Nozzle upside down.
➢
Unscrew two (2) Power Nozzle cover
screws.
➢
Turn Power Nozzle right side up.
Press handle release pedal and lower
the swivel. Lift rear and side latches
up.
➢
To remove cover, grasp the sides and
pull out.
Belt Changing
Side Latch
Pestillos laterales
Loquet latéral
Rear Latches
Pestillos traseros
Loquets arrière
Always follow all safety precautions
before performing maintenance to
the POWER NOZZLE.
POWER NOZZLE CARE
WARNING
Electrical Shock or Personal Injury
Hazard.
Disconnect the electrical supply
before performing maintenance to
the vacuum cleaner. Failure to do
so could result in electrical shock
or personal injury from vacuum
cleaner suddenly starting.