Filter
Top Products
Optima 45 - 3 23
LOG PLACEMENT
Archgard chooses ceramic fiber logs for use in the Optima 45-3. The logs are designed to give a
realistic fire package, and are created for long life, to give you the same beautiful look as the day
they were originally installed. Care must be given when first installing the logs and if removed for
servicing, as they can be damaged or broken if not handled properly. Please note that logs may
vary slightly in size and shape but does not affect performance.
Gas and vent connection must be made before installing the ceramic fiber logs on the burner.
NOTE: Improper placement of logs may cause sooting on the internal parts and glass, and will not
be covered under warranty. Do not use broken or damaged logs.
NOTE: Installing the ceramic logs in any other position other than shown will result in flame impingement
causing sooting of the logs, brick liner and ceramic glass viewing area.
WARNING: Failure to position the parts in accordance with these diagrams or failure to use
only parts specifically approved with this appliance may result in property damage
or personal injury.
LOG #83
LOG #74
LOG #13
LOG #142
LOG #12
LOG #80
PLATINUM EMBERS