Filter
Top Products
5. WAND AND HOSE COMPATIBILITY
WAND PART NO. CT175
VACUUM HOSE PART NOS.
CH515, CH615, VXCH515 & VXCH615
7. SERVICE PARTS
1
2
4
3
KEY NO. PART NO. DESCRIPTION
1 09234 Belt
2 09233 Brush roll
3 09236 Brush roll cover with screws
4 09235 Wand release pedal
Order Service Parts by “Part No.”, not by “Key No.”
6. SERVICE INFORMATION
To avoid unnecessary service calls, check the belt and brush roll often. Replace
the belt if it is stretched or cracked. Clean the brush roll bristles when they are
wrapped with thread and hairs. Build-up could cause the brush to rotate unevenly.
The model number and serial number are indicated on the rating label located
underneath the power brush. Always refer to these numbers when inquiring about
service.
NOTE: The motor is permanently lubricated and sealed. Do not oil the motor at
any time.
- 7 -
WAND PART NO. CT170 VACUUM HOSE PART NOS. CH520 & CH620
HOSE HANDLE
HOSE HANDLE