Filter
Top Products
POWER BRUSH
NECK RELEASE
PEDAL
HOSE HANDLE TO WAND CONNECTION
1. HOW TO ASSEMBLE POWER BRUSH/WAND/HANDLE
1. Read important safety instructions before installing power brush.
2. Ensure hose is disconnected from
power supply before installing power
brush.
3. Push wand into power brush neck so
that the lock button snaps in place.
4. Connect hose handle into wand quick
connector and ensure that the prongs
are aligned with the receptacle holes.
Push until lock button snaps in place.
HOSE
HANDLE
LOCK
BUTTON
LOCK BUTTON
POWER BRUSH
NECK
WAND TO POWER BRUSH CONNECTION
HEIGHT
ADJUSTMENT
PEDAL
PRONGS
LOCK
BUTTON
LOCK
BUTTON
HOSE
HANDLE
WAND
WAND
- 3 -
RECEPTACLE
RECEPTACLE
WAND
GRIP
WAND
RELEASE
PEDAL
HOSE HANDLE
RELEASE BUTTON
QUICK
CONNECTOR
PRONGS
POWER
BRUSH
WAND & HOSE COMPATIBILITY
See section 5 on page 7
for wand and hose
compatibility table.
?