![](http://pdfasset.owneriq.net/1/02/10294932-1341-41a5-8734-b1e13caebed0/10294932-1341-41a5-8734-b1e13caebed0-bg21.png)
Appendix B Initializing the system 33
BCM 4.0 for BCM1000 Installation and Maintenance Guide Addendum
a If using a terminal emulation program (Hyperterminal), attach a configuration computer to
the BCM main unit serial port (recommended method).
b If you are accessing the BCM main unit through your local area network through SSH
(secure socket shell), use the default IP address 10.10.10.1.
5 When prompted for a User ID, type:
nnadmin
6 When prompted for a Domain, press <ENTER>.
7 When prompted for a Password, type:
PlsChgMe!
8 The Configuration main menu screen appears. Refer to Figure 3.
Figure 3 Configuration main menu screen
9 Enter the number of the parameter you want to configure.
Note: If the Initialization Menu screen appears instead of the Main Menu shown above,
your BCM system is not initialized correctly.
Warning: Changing this information on an existing system completely erases the
telephony programming and disables the telephony system. It also reboots the BCM
system.