Filter
Top Products
Charging without the Charging Base
Neato Vacuum User’s Guide 21
2 If you later decide to use the charging base, you can reinstall the power adapter into
the charging base. Press the release button on top of the charging base to open the
back of the unit. As shown in the illustration below, plug the round connector into
the receptacle and wrap the cables around the cable wrap pegs. Then extend the
cable out of the side of the charging base and plug it into a three-prong wall outlet.
Charging base (internal view)
NOTE:There are exit holes on either side of the charging base so that you can
have the cable exit the charging base on the side closest to the wall plug.
cable wrap
pegs
power cable