Filter
Top Products
Using the Charging Base
Neato Vacuum User’s Guide16
Using the Charging Base
The Neato Vacuum has a preinstalled rechargeable battery that has to be fully charged
before you can use it for the first time.
You can use the charging base to charge it as described in the steps below, or plug the
charging cable into the vacuum’s power port as described in Charging without the
Charging Base on page 20.
To use the charging base, follow these steps:
1 Plug the charging base into the wall and place it on the floor in a room that you want
to vacuum frequently and which provides the vacuum a clear path to return to
recharge itself.
2 When placing the charging base, ensure that:
•the back of the charging base is against a wall
•the charging base is least 3 feet from a corner of the room
•the charging base is not tilted
NOTE:There are exit holes on either side of the charging base so that you can
have the cable exit the charging base on the side closest to the wall plug.
Refer to the illustration on page 9.