Filter
Top Products
20
W415-0536 / C / 09.06.06
1. Attach screw and spacer as illustrated in Fig. 46 to the
bottom of both sides of the front housing.
2. Attach the face plate bracket provided to the top edge
of the front housing using 2 #8 - 1/2” truss head screws as
illustrated in Fig. 47.
3. Lift and hook the faceplate over the spacers. Then
push the top of the faceplate back until it comes in contact
with the face plate bracket, then secure on the underside
by using the 2 1/4-20 screws provided as illustrated in Fig.
49.
SCREW
&
SPACER
NOTE: A 1/4” gap must be maintained between
the front and all nishing material due to regular
removal.
AFK / WI FACE KIT INSTALLATION
FIGURE 47
FIGURE 46
FIGURE 48
FIGURE 49