Filter
Top Products
8
W415-0405 / B / 03.25.04
A A
A A
A
hearth is NOT necessaryhearth is NOT necessary
hearth is NOT necessaryhearth is NOT necessary
hearth is NOT necessary
but is recommended for aes-but is recommended for aes-
but is recommended for aes-but is recommended for aes-
but is recommended for aes-
thetic purthetic pur
thetic purthetic pur
thetic pur
posesposes
posesposes
poses
..
..
.
WARNING:WARNING:
WARNING:WARNING:
WARNING:
It is MANDIt is MAND
It is MANDIt is MAND
It is MAND
AA
AA
A
TT
TT
T
OROR
OROR
OR
Y to haY to ha
Y to haY to ha
Y to ha
vv
vv
v
e an insulae an insula
e an insulae an insula
e an insula
ted wted w
ted wted w
ted w
all be-all be-
all be-all be-
all be-
hind the fireplace, when the fireplace is being installedhind the fireplace, when the fireplace is being installed
hind the fireplace, when the fireplace is being installedhind the fireplace, when the fireplace is being installed
hind the fireplace, when the fireplace is being installed
on an outside won an outside w
on an outside won an outside w
on an outside w
all or call or c
all or call or c
all or c
hasehase
hasehase
hase
..
..
.
1. Position log #1 as shown, so that the bottom end is
pressed against the left inner side of the chamber. The log
base is moulded to cradle the underside of log #1, allow-
ing it to rest diagonally, as shown.
2. For correct positioning of log #2, the top end of log #1
must be lifted up off the base, as shown.
3. The bottom end of log #2 is pressed against the inner
right side of the chamber. The underside branch of log #2
fits under the top end of log #1.
Once logs are in final position, close the screen.
A
B
C
D
LOG BASE
#1
#2
COLD CLIMATE INSTALLATION
HEARTH
LOG INSTALLATION
#2
#1
HOOD
Attach the hood by pressing the
top flange into the clips along
the top of the louvre opening.
Secure using a screw through
the centre slot.
LOWER LOUVRES
Insert the hinge clips into the
slots located at the bottom left
and right corners of the unit.
To remove the louvres, pull the
back tabs of the clips forward,
while pushing the louvre assem-
bly back. Lift the clip.
UPPER LOUVRES
Insert the louvre tabs into the
slots located at the top left and
right corners of the unit.
L334 LOUVRE INSTALLATION
C
B
A
C
HINGE
CLIP
SLOT
SLOT
TAB
B
A
CLIPS
CENTRE
SLOT
FLANGE
SCREEN COVER REMOVAL
1. Remove the upper
louvre (shown with
louvre removed).
2. Remove the screw
securing the
screen cover.
3. Un-hook the screen
cover from the unit.
2
3
1