Filter
Top Products
6
W415-0405 / B / 03.25.04
Sides.................0 mm / 0 inches
Sides.................0 mm / 0 inches
Floor................. 0 mm / 0 inches
Top 0 mm / 0 inches
The minimum distance from the top of the unit that the
mantel can be installed is 0", at any depth.
When using paint or lacquer to finish theWhen using paint or lacquer to finish the
When using paint or lacquer to finish theWhen using paint or lacquer to finish the
When using paint or lacquer to finish the
mantel, such paint or lacquer must be heatmantel, such paint or lacquer must be heat
mantel, such paint or lacquer must be heatmantel, such paint or lacquer must be heat
mantel, such paint or lacquer must be heat
resistant to prevent discolouration.resistant to prevent discolouration.
resistant to prevent discolouration.resistant to prevent discolouration.
resistant to prevent discolouration.
Sides.........................0 inches
Back..........................0 inches
Floor..........................0 inches
Top............................0 inches
1. Choose fireplace location.
2. Place fireplace in position.
3. Frame in fireplace with header across the top. It is impor-
tant to allow for the finished facing materials when setting
the depth of the frame.
4. Remove the two screws
from the sides of the fire-
place and attach the nail-
ing tabs with the screws.
5. To determine the final
location of the nailing tab,
you must first determine
the thickness of your fin-
ishing material (i.e.
sheetrock/drywall) This will determine the dimension from
the control panel front edge to the nailing tab. Secure with a
sheet metal screw supplied.
6. Attach the nailing tabs to the frame.
MANTEL
FRAMING AND FINISHING
CLEARANCE TO COMBUSTIBLES
Nailing
Tab
Installation
FINISHING
Sheet
Metal
Screw