Filter
Top Products
Keypad Controls and Indicators
Ready Light
will light when all zones are secure
and system is ready to be Armed.
Zone Lights (
1 through 4)
will light to indicate
that the corresponding Zone is open, and will
flash to indicate a zone in alarm.
Armed Light
will light when system is Armed,
and will flash when system is in Alarm
Key - (Reset) used to clear miss-entered
codes, reset Alarm Memory, etc..
System Light will light and the Keypad
sounder will pulse to indicate that a system trou-
ble is present.
(See System troubles, Page 12)
Key Press to display any present
System troubles. Only available when
System Light is lit.
(See System troubles, Page 12)
Emergency Keys Press
simultaneously to signal
an emergency condition.
Press
$
+
$
for
Auxiliary Emergency or
3
+
3
for Police Emer-
gency. (Programmable)
Bypass Key Used to
bypass zones. Press
Bypass and the corre-
sponding zone number,
and then Arm system.
Key Used to enable
special functions and op-
tions. Press
and then
the corresponding Spe-
cial Function number Op-
tion (See Special Func-
tions, Page 10)
Numerical Keys 1-9, 0. Used to enter
User Codes, Zone numbers, etc.
5
NAPCO
Oi220a
page 5
Tuesday, September 16, 1997 08:30