Filter
Top Products
Special Functions
By pressing
A
followed by the the appropriate key, (do not press simultaneously) these special functions and features
can be enabled:
Easy Arm
(when system is disarmed)
The Easy Arm feature allows the system to be armed by
pressing
followed by . This will allow the easy
arming of the system by someone who is not a regular
system user.
Easy Exit
(when system is armed)
This function (if programmed) allows an occupant to leave
the premises without disarming the system. Pressing
followed by while the system is armed will
start a 3 minute period, during which you can leave through
the Exit/ Entry door.
Bell / Battery Test
Pressing
followed by will cause the bell, or
siren to sound for 2 seconds. This will also initiate a test of
your battery to make sure it is adequately charged. The
P400 also performs an automatic battery test very 24 hours
Access Output
If programmed, pressing
followed by will
activate the Access Output which may be configured to
open a door strike, turn on lighting, or activate some other
special feature your installer has provided.
Display System Trouble
Pressing
followed by when TROUBLE
is lit will cause the system to display any current system
troubles. Pressing
will exit the Display System
Trouble Mode.
Chime Mode On / Off
Pressing
followed by will activate / deactivate
the door chime. Activating this feature will cause any door to
beep the keypad sounder when it is opened.
Program Mode
Pressing
followed by will enable the “Program
Mode”, which will allow you to program and erase user codes.
(see Programming user codes, page 14)
Keypad Sounder On / Off
Pressing
followed by will deactivate / activate
the keypad sounder, depending on its present state. By
deactivating the sounder on a keypad installed in a bedroom,
for example, you will only turn off
that
keypad’s sounder.
All other keypads on the system will still sound normally.
10
Oi230a
page 10
Tuesday, September 16, 1997 08:26