Filter
Top Products
30
SYSTEM TROUBLE ERROR CODES
Trouble
Indication
System Trouble
Condition
Action
E19-00
User Program Memory Error Call installing company for service.
E-20-00
Dealer Program Memory Error Call installing company for service.
E-21-00
System Shutdown Call installing company for service.
E-22-NN
Sensor Watch Activity Failure A Motion Sensor on the zone indicated has failed the programmed Sensor Watch activity test.
Insure that the sensor is able to detect activity in the area; clear any obstacles which may be
blocking the sensor from detecting activity. Press
C to clear the display, and then use the
Function Menu to Reset Sensor Watch Failure (see page 17). If you cannot correct the
problem yourself, call installing company for service.
E-23-00
Burglary Bus Failure Call installing company for service.
E-24
Service Message The system is in need of a preventive maintenance service call.
E-27-00
Printer Failure Call installing company for service.
E-39-00
Receiver Capacity Error Call installing company for service.
E-40-NN
RF Self Test Failure A wireless motion sensor on the zone indicated has failed its automatic self test routine.
Call installing company for service.
E-41-NN
Fire Trouble A problem has been detected on the Fire zone indicated. Call for service. (GEM-P1632 and
GEM-P816 panels only).
E-51
Bell/Siren Trouble There is a problem with the Bell or Siren. Call installing company for service.
E-58-00
Telemetry Trouble Call installing company for service.
E-59-00
Telemetry Failure Call installing company for service.
E-66-00
"Clean Me" Smoke Detector Dirty Clean detector or call installing company for service.
E-99-00
Keypad Panic Shorted too Long Call installing company for service.