Filter
Top Products
20
Your alarm specialist may have
programmed your system to be
monitored by a central station. The built-
in digital communicator can transmit
emergency signals and status reports to
the central station 24 hours a day.
Communicator Features
Abort Delay. Ask your installer which
of your zones have Abort Delay, a
delay that enables you to reset the
system before it communicates to the
central station. Your system has a
SIA CP-01 required Abort Delay of 30
seconds. It may be removed or in-
creased up to 45 seconds (at your
option) by consulting with your in-
staller.
Regular Burglary (Non-24-Hour)
Zone reports are aborted by disarming
within the delay period.
24-Hour Zones and zones
programmed to report restores must
be restored first, then the panel armed
and disarmed, all within the delay
period.
Opening and/or Closing
Reporting. Your system can notify the
central station every time it is disarmed or
armed. Any or all of up to 96 different
users can each be identified. If your
system reports on arming (Closing
Report), the central station will
acknowledge arming. This will signal at
the keypad as a “ringback” beep. Note: If
the ringback signal is not heard, call for
service.
CENTRAL STATION MONITORING