Filter
Top Products
PAGE 8 —ST2010 SERIES SUBMERSIBLE PUMP • OPERATION AND PARTS MANUAL — REV. #3 (12/07/12)
SPECIFICATIONS
Table 1. Specifications
Model
ST-2010/ST-2010A/
ST-2010CUL
ST-2010B ST-2010TCUL
Type Submersible Pump Submersible Pump Submersible Trash Pump
Impeller Cast Ductile Iron Cast Ductile Iron Cast Ductile Iron
Discharge Size 2.00 in. (51 mm) 2.00 in. (51 mm) 2.00 in. (51 mm)
Maximum Pumping
Capacity
85 gallons/minute
(322 liters/minute)
85 gallons/minute
(322 liters/minute)
90 gallons/minute
(341 liters/minute)
Max. Solids Diameter --- --- 1.00 in. (25 mm.)
Max Head
54.7 ft. (16.6 meters)
ST-2010CUL: 50 ft. (15.24 m)
54.7 ft. (16.6 meters) 45 ft. (13.7 meters)
Power 1.0 HP (0.75 kw) 1.0 HP (0.75 kw) 1.0 HP (0.75 kw)
Voltage; Phase 1Ø 115V 1Ø 230V 1Ø 115V
Starting Amps 63 A 30 A 53 A
Running Amps
ST2010: 13.5 A
ST2010A: 13.5 A
ST2010CUL: 11.9A
6.7 A 9.4 A
Control Box (see Note 3) CB3 CB6 CB3
Thermal Overlaod
Protection
YES YES YES
Rotation CCW (Note 1) CCW (Note 1) CCW (Note 1)
Mechanical Oil seal
Capacity
150 cc. (Note 2) 150 cc. (Note 2) 180 cc. (Note 2)
Check Frequency Monthly (300 hrs.) Monthly (300 hrs.) Monthly (300 hrs.)
RMP (Speed) 3550 +/- 30 3550 +/- 30 3550 +/- 30
Power Cable Length 50 ft. (15.2 meters) 50 ft. (15.2 meters) 50 ft. (15.2 meters)
Dry Net weight 55 lbs. (25 Kg.) 55 lbs. (25 Kg.) 77 lbs. (35 Kg.)
1.
Motor Rotation – Upon start-up, the pump "kicks" in the opposite direction of motor rotation. The correct rotation is counterclockwise (CCW) as viewed from
the impeller end of the pump.
2. Mechanical Oil Seal – Use a good grade 10 weight non-detergent hydraulic oil (i.e. Shell Turbo 32 or equivalent). Fill oil cavity 75% to 85% full (allow air
space for expansion).
3. Control Box - Control box (Table 2) may be required for certain pumping applications.
Table 2. Control Box Specifications
Model No. Voltage Type UL/CSA Listed
Thermal
Overload
Protection
Float Switch
Capability
CB3 115 VAC, 60 Hz Single-Phase YES YES YES
CB6 230 VAC, 60 Hz Single-Phase YES YES YES