Filter
Top Products
79D0004 15
WARNING
WARNING
A canopy is furnished with each firebox and MUST be installed for safe operation. Refer to Figure 19.
The firebox canopy must not be
modifi ed or replaced with a canopy
that may be provided with the
unvented decorative room heater.
1. Align the canopy with the holes in the top frame.
2. Secure canopy with five (5) screws provided.
3 Repeat on other side for See-Through Unit (LSTF36) and
Peninsula Unit (LPF36). Install the 20" canopy on the
shorter end with two (2) screws (LRCF36/LLCF36).
Close fi replace screen panel before
operating decorative type unvented
room heater.
CANOPY INSTALLATION
Figure 19 - Canopy Installation