Filter
Top Products
4
How Your Humidifier Works
Your new MoistAIR humidifier is designed to
satisfy home humidity requirements through the
principle of evaporation of water into the air.
After water is added to the bottle, the filters begin
to soak up the water and become totally saturated
in approxi-mately 30 minutes. Air is drawn in from
the rear of the humidifier and through the filters by
means of circulation fans. As air passes through
the filters, moisture is absorbed into the air and
then released in the form of vapor. No water
droplets will enter the home. All evaporation into
the air takes place in the humidifier, which means
that the residue left by evaporating water is not
passed into the home, but remains in the filter.
CAUTION: To reduce the risk of injury, fire or
damage to humidifier, use only cleaners
specifically recommended for humidifiers.
Never use flammable, combustible or
poisonous materials to clean your humidifier.
To reduce the risk of scalds and damage to
humidifier, never put hot water in humidifier.
Assembly
Your new MoistAIR humidifier is completely
assembled for you to use. Remove the bag pack
containing two plastic caster pads from top of
humidifier and retain for future use if required. See
the following Step 1 for instructions.
Remove the packaging material from inside your
humidifier and follow the instructions of this
operator’s manual for proper usage. The
packaging material is located under the fan
assembly. Remove the packaging material and
discard.
CAUTION: Use only EPA Registered
Bacteriostat. Under no circumstances should
you use water treatment products designed
for Roto belt or Ultrasonic humidifiers.
QUARKSP6647 HD14070:SP6647 .qxd 12/10/2009 3:39 PM Page 4