Filter
Top Products
–21–
How to cancel the setting <Individual setting>
3
Press the SET button.
The day of the week is determined and the program number blinks.
2
5
Press the CANCEL button.
The setting contents of the ON or OFF-TIMER are canceled and
is displayed on the time display section.
6
Press the PROGRAM button.
When the PROGRAM button is pressed, the setting is sent to the air
conditioner.
When the setting is received, a buzzer sound (pip, pip, pip) is emitted.
The setting contents of each program are canceled. Perform the operation
indicated above for each program to be canceled.
Press the PROGRAM button.
and current day of the week blink.
1
How to cancel the setting <Collective setting>
Confirm mode
Releasing procedure
The Confirm mode can be terminated by pressing the ON/OFF, CANCEL or
SET button.
Press the PROGRAM button for 3 seconds or more.
blinks and the setting content lights.
1
The WEEKLY TIMER setting contents can be confirmed.
2
Mon P1 P2 P3 P4
P1 P2 P3 P4Tue
Sun P1 P2 P3 P4
P1 P2 P3 P4
Display of all of the
days of the week
Press the “ or (TIMER)” button.
Select a day of the week and a program number to be confirmed.
Display starts from the current day of the week. For the program without
setting,
is displayed. When the PROGRAM button is pressed in
Confirm mode, a setting mode is set.
Press the “ or (TIMER)” button.
Select a day of the week to be canceled.
4
Press the “ or (TIMER)” button.
Select a program number to be canceled.
At cancelation operation, do not press the SET button. If the SET button is
pressed, the mode is shifted to the Set mode.
■ When the same operation contents exist in the same program number of all the days of the week, collective erase is allowed. In Step
2 above, select “all of the days of the week”. The procedure from Step 3 is the same as that indicated above.
If the operation contents have been changed or erased by individual setting after the collective setting described in page 20, causing
setting content discrepancies among the days of the week, collective erase is not allowed.
• If no operation is performed for 60 seconds in Confirm mode, the
Confirm mode is terminated.
NOTE
RFB012A006C_EN_001-032_0409 4/9/14, 9:4021