Mitsubishi Electronics MELSEC-F Fan User Manual


 
Adjustment of I/O Characteristics 8
8-1
8. Adjustment of I/O Characteristics
The factory, the FX
2N
-5A has standard I/O characteristics in accordance with each input mode
(BFM #0, BFM #1) set as the factory default.
In the voltage input mode and current input mode, adjust the standard I/O characteristics for
each channel. (The user cannot adjust the standard I/O characteristics in the analog value
direct input mode and the analog value direct output mode.)
8.1 Standard I/O characteristics
Explanation
The I/O mode of the standard I/O characteristics is abbreviated as shown below:
0. Voltage input, -10 to 10V
-32000 to 32000
1)
2)
3)
1)
2)
3)
Input mode set in BFM #0, BFM #1
Input mode or output mode
Analog input range or Analog output range
In the Voltmeter/Amperemeter analog input
mode, Absolute Voltage/Current output
mode and the Scaling function, 3) Digital
value of Analog input range or Analog
output range is omitted.
FX2N-5A Special function block