Milwaukee 2260-21 Home Safety Product User Manual


 
22 M12 160x120 Thermal Imager Operator’s Manual
1 Press and to select the menu item to set, followed
by
t to conrm your slection.
2. Press
and to change the setting, followed by
to conrm the change. Changes you make to settings
remain in effect even after you turn off the power and
turn it back on again.

Use the SETUP menu to set the TIME, TIME FORMAT,
DATE, DATE FORMAT, SCALE (˚F or ˚C), BRIGHTNESS,
LANGUAGE, and the way to erase images on the installed
SD memory card. To call up the SETTINGS menu, from
live mode press
, then if needed to select SETTINGS,
then
to conrm your selection. The SETTINGS menu is
shown in Figure 15.
SETTINGS
TIME FORMAT
EMISSIVITY
SCALE
DATE FORMAT
DATE
12 HR
0.95
˚F
MM/DD/YYYY
09/29/2011
TIME
10:45PM
BRIGHTNESS
LANGUAGE
ENGLISH
ERASE SD MEMORY CARD
Figure 15. The Settings Menu