Filter
Top Products
Replacing one type of filter
with another
Depending on model, your vacuum
cleaner is fitted with one of the following
exhaust filters as standard:
b an ACTIVE air clean filter or
c an ACTIVE HEPA filter.
If replacing b or c with a, please note
If you wish to replace the ACTIVE air
clean filter b or the ACTIVE HEPA filter
c with a SUPER air clean filter a it is es-
sential that you also fit the filter grille
(see the section on "Accessories sup-
plied").
The built-in exhaust filter change in-
dicator (Re-set button 7) is de
-
signed for the change cycle of an
ACTIVE air clean or an ACTIVE
HEPA filter.
The filter change indicator light will
have no significance if a SUPER air
clean filter has been fitted, but
should still be re-set. The SUPER air
clean filter should be replaced with a
new one every time you start a new
packet of dustbags. (A SUPER air
clean filter is supplied with every
packet of Miele dustbags).
Remember to reset the "Exhaust filter
change indicator".
Maintenance and care
29