Filter
Top Products
Blowing out
Blower connection socket
(depending on model)
The blower connection socket can be
used to connect the suction hose to the
"blower" outlet of the vacuum cleaner,
e.g. for dusting off multi-layered radia
-
tors and blowing dust out of inaccessi
-
ble corners so that it can be vacuumed
up. It can also be used to "blow out" the
suction hose if it should ever become
blocked.
^ Press the release button for the dust
compartment lid and raise up the lid
until it clicks into place.
^ Take out the exhaust filter or the filter
grille if this has been fitted and re-
place with the blower connection
socket.
^ Close the dust compartment lid.
^
Now open the accessories compart
-
ment and insert the elbow of the suc
-
tion tube into the blower connection
socket.
Use
22