Filter
Top Products
Park-system
A Park-system has been designed for
conveniently parking the vacuum
cleaner during pauses. A special park
-
ing attachment is fitted to all floorheads
including the Electrobrush and to the
rear of the cleaner.
^
Fit the lower clip on the floorhead into
the slot on the end of the vacuum
cleaner from above (see illustration).
Switching on and off with the
Park-system
Parking the floorhead in this way whilst
vacuuming automatically switches off
the cleaner without needing to press
the On-Off switch. Lifting the floorhead
out of the Park-system switches the
cleaner on again.
If you intend leaving your vacuum
cleaner parked in this way for any
length of time, you must switch it off at
the socket, unplug it and rewind the
mains cable.
Transporation and storage
^
Stand the vacuum cleaner vertically.
^
Fit both clips on the Electrobrush into
the two point holder on the side of the
cleaner (use Adapter a with the
standard floorhead, turbobrush and
other floor brushes).
This makes the cleaner easier to carry
or store.
Setting down, transportation and storage
23