Filter
Top Products
CHAPTER 5: QUICKFLY RIGGING
24
THE MTG-JM1 VERTICAL GRID
The optional MTG-JM1 vertical grid suspends JM-1P verti-
cal arrays of up to six units. The grid was designed specifi-
cally for the JM-1P and is compatible with the GuideALinks
and quick-release pins included with the JM-1P.
The MTG-JM1 vertical grid comes with four quick-release
pins for securing the JM-1P connected directly to the grid.
To secure the front GuideALinks, the quick-release pins are
inserted at the front of the grid. To secure the rear
GuideALinks, the pins are inserted from the inside of the
grid. Additional JM-1Ps in the array are secured with the
quick-release pins included with each loudspeaker.
The MTG-JM1 vertical grid has a row of nine hanging points
in the center of the grid. Two additional attachment points
are located at the left and right rear corners of the grid to
provide additional control and stability.
Rotating the Meyer Sound Logo
To accommodate the orientation of the JM-1P, the Meyer
Sound logo on the unit’s grille frame can be rotated.
To rotate the Meyer Sound logo on the JM-1P grille frame:
Pull up on the logo, rotate it to the desired position, and
release.
MTG-JM1 Vertical Grid Dimensions; Weight, 47 lbs (21.32 kg)
MTG-JM1 Vertical Grid with JM-1P
29.00
[737 mm]
37.39
[950 mm]
3.00
[76 mm]
34.64
[880 mm]
Ø0.94 (x9)
[Ø24 mm]
MTG-JM1 Vertical Grid with Three JM-1Ps