Meyer 3218 Vacuum Cleaner User Manual


 
A. For Regular Tightening:
IMPORTANT AT ALL TIMES OF OPERATION!
Correct apron tension occurs when the return main
apron slats ride 2"at midspan offof the front pair of slide
rails and only one apron slat touches at mid span on the
rear pair of slide rails.
For Additional Regular Tightening Adjustment:
There are 3 anchor holes on the clevis end of the
tensioner rod. Relieve tension and anchor the clevis to a
different hole when there is no more adjustment.
NOTE:
After repeated regular tightening of the main
apron chain assemblies and when the return main apron
slats begin to “bottom-out” onto the top of the channel
iron of the steel frame stringers, remove equal number of
links from each apron chain assembly. Readjust the
spring loaded tensioner for correct
main apron tension.
B. For Fine
Tightening & to Equalize Stretch in Indi
-
vidual Chain Strand Pairs.
1. Allows to Fine Adjust/Tighten Individual Chain Strand
Pairs of each Main Apron.
2. Allows to Equalize Stretch in Individual Chain Strand
Pairs of each Main Apron.
Loosen the spring loaded tensioner on the main apron
chain prior to making the adjustments on the individual
chain strands. This will allow easier adjustment of the
adjuster bolt. Located on the inner chain strand of each
main apron assembly, there is an adjustable, tightening
pivot arm with a ½” x 1-1/4” adjuster bolt. Turn this ½” x
1-1/4” bolt by first loosening two set screws located on
the adjustable pivot arm. Tighten or loosen the ½” ad-
juster bolt to make fine adjustment/tightening in the indi-
vidual chain strands or to equalize stretch in the
individual chain strand pairs of each independent main
apron assembly. Retighten thetwo set screws and read-
just the spring loaded tensioner for correct apron ten
-
sion.
3200 & 4200 Series -- 27 –
ADJUSTMENT of 3200-4200 SERIES MAIN APRON CHAINS
08 SERIAL #’S & LATER
(Left Hand Side - Side View
) - typical both sides
FRONT
2"
10" STRINGER
FRONT SLIDE
RAIL
SPRING LOADED
TENSIONER
REAR SLIDE
RAIL
REAR
ONE APRON
SLAT
TENSIONER
ROD
IMPORTANT!
WARRANTY MAY BE VOIDED
New Meyer Forage Box “Manufacturer’s Warranty” shall not apply to any Meyer For
-
age Box, main apron chain
, which has been subjected to misuse, negligence, alter
-
ation, accident or incorrect
operation (adjustment) procedures.
Please! Follow Correct
Main Apron Tightening and Adjustment Procedures!